“FLOWRISE” Diaphragm valves are used on Shut‐Off And Throttling Service For Slurries, Liquids, Water and Vacuum.“FLOWRISE” Diaphragm A Seal is Achieved by a smoothly membrane, usually elastomer and possibly reinforced with a metal part The Membrane is tensed by the effect of a Stem/Compressor with lineal movement until contact is made against the sea of the body.
“FLOWRISE” Diaphragm The Operating parts of the diaphragm valve are isolated form the flow. It’s makes this valves suitable for various flows and also hazardous, abrasive and corrosive flows as its sealing system avoids any contamination towards of form the Environment.
“FLOWRISE” Diaphragm Valve are available in a Wide Variety of Metal, P.P., PVC, Rubber and PTFE Linings. They are well suited for the handling of multiple chemicals applications both clear fluids for water – air as well as slurries.
“FLOWRISE” Diaphragm Valves has an extremely Use for applications at low pressure and slurry fluid where most other kinds of valves corrode or become obstructed.
“FLOWRISE” Diaphragm valve is Smooth & Quick Operating and Opening Valves. Below Some Various Style Diaphragm Valves.
“FLOWRISE” Weir ‘a’ design valve can be used for either off/on and throttling services.
“FLOWRISE” Straight through (kb) type used for on/off services.
Size Range |
15MM TO 300MM |
BODY |
CAST IRON, CAST STEEL, S.S. 304/316, ALUMINIUM , P.P.,PVC. |
MFG.STD |
BS 5156 |
INSP.Test STD |
BS 5146 |
End Connection |
ASA CLASS 150, TABLE-D/E, DIN 2533 |
Face To Face |
DIN 3202 |
Body Pressure |
PN 10 |
Spark Test of Rubber Lined |
10KV |
Temperature Range |
FORM 10*C(‐14*F)UP TO + 170”c(+350*F) DEPENDING ON MATERIALS. |
Operated |
MANUAL, Spring Diaphragm Actuator Operated. |